File manager - Edit - /home/newsbmcs.com/public_html/static/img/logo/cw1200.tar
Back
Kconfig 0000644 00000001725 15030565002 0006050 0 ustar 00 # SPDX-License-Identifier: GPL-2.0-only config CW1200 tristate "CW1200 WLAN support" depends on MAC80211 && CFG80211 help This is a driver for the ST-E CW1100 & CW1200 WLAN chipsets. This option just enables the driver core, see below for specific bus support. if CW1200 config CW1200_WLAN_SDIO tristate "Support SDIO platforms" depends on CW1200 && MMC help Enable support for the CW1200 connected via an SDIO bus. By default this driver only supports the Sagrad SG901-1091/1098 EVK and similar designs that utilize a hardware reset circuit. To support different CW1200 SDIO designs you will need to override the default platform data by calling cw1200_sdio_set_platform_data() in your board setup file. config CW1200_WLAN_SPI tristate "Support SPI platforms" depends on CW1200 && SPI help Enables support for the CW1200 connected via a SPI bus. You will need to add appropriate platform data glue in your board setup file. endif Makefile 0000644 00000000662 15030565002 0006204 0 ustar 00 # SPDX-License-Identifier: GPL-2.0 cw1200_core-y := \ fwio.o \ txrx.o \ main.o \ queue.o \ hwio.o \ bh.o \ wsm.o \ sta.o \ scan.o \ debug.o cw1200_core-$(CONFIG_PM) += pm.o # CFLAGS_sta.o += -DDEBUG cw1200_wlan_sdio-y := cw1200_sdio.o cw1200_wlan_spi-y := cw1200_spi.o obj-$(CONFIG_CW1200) += cw1200_core.o obj-$(CONFIG_CW1200_WLAN_SDIO) += cw1200_wlan_sdio.o obj-$(CONFIG_CW1200_WLAN_SPI) += cw1200_wlan_spi.o
| ver. 1.4 |
Github
|
.
| PHP 8.2.28 | Generation time: 0.02 |
proxy
|
phpinfo
|
Settings